Extractor Repair Parts

Regulator used on BE floor drive hydaulic circuit. Item Number: HC0272 4.0 GPM fixed flow regulator used on BE floor drive hydraulic circuit. Four ...

160 cc hydraulic motor with 4 bolt mounting pattern. Item Number: HC0120 160 cc hydraulic motor with 4 bolt mounting pattern. Used on all BE units ...

10″ or 12.25″ 3 piece vacuum cup assembly. Heavy duty suction cup assembly for BHS extractors, transfer carriages, and transfer carts.

Control Valve, BE Control Valve.

8″ x 3″ Poly Wheel, 1 3/16″ Bore Item Number: C0050-2

Linear slide block. Item Number: 43054007 Linear slide block, mounts extractor arm to 3" carrier shafts. Used on all BE models.

Front cover for the proximity sensor housing. Item Number: 41657003 Front cover for the proximity sensor housing. Used on BE's with optional magnet...

Flange bearing used on BE magnet swing shaft. Item Number: PT0430 4 bolt flange bearing with 1 1/2" bore. Used on BE magnet swing shaft.

Flange bearing used on equalization shaft of all BE Models. 2 bolt, 1 1/2″ bore. Item Number: PT0405

Solenoid valve used as vacuum release valve on BE units Item Number: P0207 120 VAC Solenoid valve used as vacuum release valve on BE units with vac...

Replacement Oil Filter For BE-SL/DS/TS Item Number: HC0317

100cc hydraulic motor with 2-bolt mounting flange. Item Number: HC0121 100cc hydraulic motor with 2-bolt mounting flange. Used on ATC arm drive and...

Floor drive assembly for BE-SL/DS. Item Number: 43722002

Taper Lock Bushing for BE-SL/DS drive wheel assembly. Item Number: 43726002

Cushion for BE extractor arm stop. Item Number: 43057003 Cushion for BE extractor arm stop on BE's with vacuum extraction.

Proximity Sensor Item Number: E0314-1

Lift cylinder top clevis assembly Item Number: 43722001 Clevis assembly for the lift cylinders on a BE-DS

Stop mount for BE’s with magnet extraction. Item Number: 43055007 Swing arm stop mounting bracker for BE's with the optional magnet extraction. Use...

Sprocket used on the equalization shaft of all BE’s. Item Number: PT0224 Sprocket used on the equalization shaft of all BE's. Keyed together. Four ...

Lift cylinder used on BE-TS. Item Number: HC0420 2 1/2" x 45"hydraulic lift cylinder used on triple stack Battery Extractors.

Indicator light on BE magnet assemblies. Item Number: E0337 Indicator light on BE magnet assemblies. Light indicates when magnet is on.

5 pin cable used on BE’s with the magnet extraction option. Item Number: E0334 5 pin cable used on BE's with the magnet extraction option. 3 ft len...

BE Gate Switch Item Number: E0312

10″ x 5″ poly drive wheel with 1 1/2″ bore. Item Number: C0510-1 10" x 5" poly drive wheel ether based to reduce flat spotting.