Bladder Tank Mini- Injector Water SupplyINJ-T10M
10 Gallon Mobile Bladder Tanker – For PS Water Injector Systems
BladderTank Mini - Injector Water Supply
This 10 US gallon (37.8 Liters) unit cleverly uses your building's water pressure to deliver water to your batteries wherever they are. No AC power is required to operate this unit. Simply fill the tank by connecting the input hose up to your building's water supply with the quick connect provided. When the tank is full (as indicated by the gauge on the top of the tank), disconnect the input hose and wheel the unit to the batteries that need to be filled.
The tank has “pressure memory;” water is stored in the tank at the same pressure that it went in (your building’s
water pressure). The output flow rate it set to be appropriate for the Water Injector System. Since this unit is powered by the pressure in your water lines, there are no pumps which makes the unit very cost effective and reliable.
The BladderTank Mini is supplied with 18 feet (5.5 Meters) of 5/8" (1.5 Centimeters) high-output industrial hose. Since this unit requires to electrical power its mobility range is unlimited.
A capacity gauge on the top of the tank indicates how full the tank is. The maximum capacity of 10 US gallons (37.8 Liters) is achieved when the tank is pressurized to 80 psi (5.5 Bar). If you have very low water pressure, or if you wish to use bottled water or some other unpressurized source you may need to use a Booster Pump.
This water supply is also compatible for use with the Stealth Watering System and the Watering Gun. Additional adaptors may be required.